Почему Smart monitor не показывает результат?

Новый Transcend внешний винт в пассивном режиме стал издавать не стандартное "кряхтение". Решил проверить его через smartctl на linux. Выдаёт такое:
=== START OF INFORMATION SECTION ===
Vendor: StoreJet
Product: Transcend
Revision: 0
Compliance: SPC-4
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Logical block size: 512 bytes
Logical Unit id: 0x5000000000000001
Serial number: ALJ9E92E11XW-DW
Device type: disk
Local Time is: Wed Oct 23 07:35:19 2019 BST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Disabled or Not Supported

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 0 C
Drive Trip Temperature: 0 C

Error Counter logging not supported

Device does not support Self Test logging

Что такое "Error Counter logging not supported" и "Device does not support Self Test logging"?
Если делать "sudo smartctl --test=long /dev/sda1" выдаёт:
Long (extended) offline self test failed [unsupported field in scsi command]